Sauna & Steam
Oceanic Saunas 01902 450 550 sales
@oceanic-saunas.co.uk www.oceanic-saunas.co.uk
12
Sauna Heater Manual
No.
Parts
Description
1
Circuit board
Circuit board
2
Bracket
Bracket
3
Cover
Protects the electronics
4
Heat resistance
Detects temperature
5
High Temp cut of switch
When temperature in
sauna room exceed 120 oC
9. Temperature sensor frame and parts
10. Installation
Important
Prior to installing sauna heater, please refer to Installation handbook and check it as following
points:
• Is the output power and type of the heater suitable for the Sauna Room? See parameter table 1.
(Technical parameter).
• Is the supply voltage suitable for the rated voltage of sauna heater.
• The location of the heater fulfils the minimum requirements concerning the distances given in
Fig 7 and chart 8 .and allow for safety and convenience.
• Is the controller box suitable for the heater power and control requirements?
• Choose the cable wire according to table 1 and the cable wire can bear high temperature 170
oC (it is recommended to use sillicon rubber cable wire).
• Do not install more than one heater in a sauna room.
The heater gets very hot when working. To avoid the risk of accidental contact with the heater, it is
recommended that a heater guard be provided. The guard is made into many kinds of patterns in
accordance with the location places, but some size must be made as the Fig 7 and chart 8.
A qualified electrician must do the installation of the heater to ensure safety and reliability.
Improper electrical connection can cause fire or electric shock. Refer to fig 1a or fig 1b (Electrical
connection chart).and fig 2
Chart 8
