Sauna & Steam
Oceanic Saunas 01902 450 550 sales
@oceanic-saunas.co.uk www.oceanic-saunas.co.uk
10
Sauna Heater Manual
No.
Description
Function instruction
1
On/off button
Push to operate
2
Light button
Push to operate for sauna room light
3
Fan button
Push to operate for control box fan
4
Setting button
Preset time and temperature and the setting confirmation
5
Increase button
Press to increase
6
Increase button
Press to decrease
7
Mode button
Change working mode
8
Time display
Display working time or waiting time to work
9
Temp. display
Display temperature
10
Light LED
Indictor Led for sauna room lamp
11
Model LED
Indictor LED for working mode. If LED is heater is in Mode A / heating mode
12
Wait LED
Indicator LE D for waiting mode, If LED is on heater is in Mode B / waiting mode
13
Sauna room
Door(interlock)
indicator LED
Indicator LED is on: Sauna Heater will not operate. i.e. the door has been opened
and the sauna must be checked for safe operation (no towel over heater etc)
and door interlock reset before countdown timer can continue. For commercial
use only where a door interlock switch has been installed.
14
High temperature LED
indicator LED is on The sauna has overheated, the room temperature has
reached higher then 120 centigrade . High temperature cut off switch has
been tripped, when the temperature in sauna room falls below 100 centigrade
investigate what has caused the problem then manually reset the switch by
inside the temperature sensor housing.
15
Fan LED
Press to operate for fan
16
Heating LED
LED On means the heat element is working
17
Stop working LED
indicator LED to show Sauna temperature has been reached and the heater is
not receiving any power until the temperature drops below preset level.
Chart 6. Keys and LED instruction
Fig 4. Controller frame
8. OC-SB Controller
