Ocean TV Ocean Series O37M, Инструкция по установке и эксплуатации

Страница: 10 / 47

Ocean TV Ocean Series Antennas
OCEAN TV 10 www.oceantv.com.au
Preparing for the installation
Install Tools and Materials
The O37/45M antenna system is designed for simple installation and setup. However, the fol-
lowing list of equipment or items should be available during installation of the O37/45M an-
tenna.
■
Electric drill and drill bits
■
Socket wrench
■
Silicon sealant
■
Fastener suitable for specific application
1. Verification of the Vessel’s Power S upply.
■
Confirm that the vessel’s power supply is 12VDC~24VDC.
2. Verification of the S atellite Receiver and IDU’s attachment and the electricity supply
■
Attach Satellite Receiver and IDU in the interior of the vessel or the trunk.
■
Connect the power of Satellite Receiver and IDU.
■
Once the power of Satellite Receiver and IDU is verified, it confirms that both Satellite
Receiver and IDU are working normally.
3. Procedure of the satellite’s attachment and installation.
■
Attach the satellite on the flat surface area of the vessel’s roof.
■
Connect each end of the Coaxial antenna cable to the satellite’s terminal and the IDU.
■
Connect the IDU and the Satellite Receiver box together through the coaxial cable.
■
M ake sure that the satellite is working normally, once the power is supplied.
Warning : Things to consider when installing the antenna.
■
Turn off the power when attaching or detaching the antenna.
■
M ake sure that the attached satellite is fixed on the flat surface.
■
When attaching, ensure that all the products are adhered properly.
■
Ensure that all the cables are connected properly.