Ocean Technology Systems
Installation of the SCU-BUD into the ScubaPro Full-Face Mask
1. Unscrew and remove the metal band that secures
the mask’s left accessory port cover, to which the
lower mask strap is attached. Remove the acces-
sory port cover.
2. Remove the mask strap from the accessory port
cover. Remove the male buckle end from the strap,
and set it aside. Install the mask strap into the buckle
of the Buddy Phone
®
microphone module.
3. Install the Buddy Phone
®
microphone module into
the mask’s left accessory port.
4. Close the metal band around the opening of the
accessory port and tighten the screw, so that the
microphone module is securely attached.
p. 1 of 2
