Battery Pack User Guide March 2020 P.8
Anodes
The 900-meter battery pack,
BP9-B3
, has anodes located on each end to minimize
corrosion. The battery pack anodes should be checked and replaced as required after every
deployment. It is important that anodes are monitored closely and are not fully consumed. If
the anodes are not maintained the battery may become damaged and cause catastrophic
failure resulting in a void warranty.
Ocean Sonics suggests replacing the anodes before 25% remaining. If the battery pack is
being deployed on a long deployment, it is recommended that you have fresh anodes.
The consumption rate of the anodes depends on many factors (salinity, temperature, water
currents, electrical leakage, etc.). After each deployment the anodes should be checked, and
the user can gauge this from previous deployments and adjust the replacement schedule as
required.
Please contact Ocean Sonics if you require more information on anode replacement or
replacement parts.
Cleaning the Seal
•
Clean all O-rings and O-
ring surfaces with ‘KimWipes’ or similar lint free tissues
•
Inspect the O-rings to ensure they are seated properly and not damaged
•
Inspect the O-rings surfaces to ensure they are not damaged
•
Lubricate all O-rings and O-ring surfaces
