Ocean Guardian FREEDOM7 Скачать руководство пользователя страница 1

Страница: 1 / 2

STEP

Please ensure your Ocean Guardian is clean and dry, and you have

a clean dry work space. You will need a medium size Philips head
screw driver and an Ocean Guardian On/Off Switch Replacement
Kit as shown.

STEP

Using the Philips screw driver, remove the old On/Off switch by

turning the screw counter clockwise. The switch will come
straight off after a few turns leaving only the old O-ring on the
Ocean Guardian unit.

Using a sharp object, gently remove this

old O-ring. Dispose of the old switch and O-rings, do not re-use
any old components.

STEP

If necessary, clean any residual rust from the old switch. Do not use

any harsh chemicals; any residual can be removed using a damp
sponge with water. Thoroughly dry the unit when finished.

STEP

Insert the new large O-ring into the Ocean Guardian unit, as

shown.

P/(08) 9300 0043 | E/ [email protected] | A/ Unit 7, 1 Winton Road, Joondalup, Western Australia 6027 | ABN/ 87 099 782 091

Ocean Guardian On/Off Replacement Switch

Содержание FREEDOM7

Страница 1: ...he old O ring on the Ocean Guardian unit Using a sharp object gently remove this old O ring Dispose of the old switch and O rings do not re use any old components STEP3 If necessary clean any residual...

Страница 2: ...hten the screw ensuring it is not too tight If it is too tight it will be difficult to rotate the switch if this is the case back off the screw slightly until the switch is easy to rotate but not too...