Oce VarioPrint 2090, Руководство пользователя

Страница: 159 / 187

Add the supplies 159
How to add the staples
1
Push against the upper part of the stapler cartridge.
2
In the same movement, lift the lower part of the stapler cartridge and pull the
stapler cartridge toward you.
3
Remove the stapler cartridge from the stapler.
4
Remove the loose staples if necessary.
Note:
Make sure that no staples fall into the finisher.
5
Take a new cartridge, type S3.
6
Remove the packing material.
7
Slide the stapler cartridge into the stapler.
Note:
Remember that the correct position of the cartridge of stapler 3 (the
off-line stapler) is upside down.
8
Press until the stapler cartridge clicks into place.
Note:
If the new stapler cartridge does not fit, put back the old stapler cartridge
and call service.
9
Close the top cover of the finisher.
10
Close the front door of the finisher.