Oce VarioPrint 2090, Руководство пользователя

Страница: 144 / 187

144 Océ VarioPrint 2090 User manual
Combine subsets into one file
Introduction
Task for operators
The Océ VarioPrint 2090 allows you to create your documents and make a
report, a manual or a brochure. Combined (built) documents can include
different parts like a title page, the table of contents, the various chapters and
the appendices. You can combine different originals into one digital file.
Subsets
A subset of a document is a number of pages to process in a defined way. When
the processing method changes, a new subset begins. When you process parts
of a document in different ways, you must divide the document into subsets.
The Set-build key
Use the Set-build key
to scan different subsets.
Remember that you can only combine hardcopy originals into a set-build job.
You can not use the Set-build key
for digital documents in the mailbox.
You can only use originals from the glass plate or the automatic document
feeder. Use the 'Scan' function on the operator panel to start a set-build job.
The automatic document feeder
Use the automatic document feeder to copy a set of originals. You can put a
maximum of 75 originals into the automatic document feeder. This number
refers to A4 originals of 80 g/m
2
(20 lb bond). Remember the following.
■
The originals must have the same size.
■
Use originals that are larger than 140 x 203 mm.
■
Use originals that are smaller than 297 x 432 mm.
■
The weight of the originals can be between 60 and 170 g/m
2
.
Note:
Make sure that the size is one of the supported standard formats if you
use the automatic document feeder.
Before you begin
1
Divide your documents into subsets.
2
Arrange the different subsets in the required order.