Oce VarioPrint 2050-70, Руководство по эксплуатации

Страница: 93 / 174

The print function 93
Print on special material
Introduction
You can use the following material for the print jobs (see ‘ Input trays, output
bins and materials ’ on page 142 ).
■
Paper from the trays.
■
Special material that you place in a tray for the current mailbox job.
■
Special material that you insert in the special feeder for the current mailbox
job.
Make sure that you place the material correctly in the paper trays and special
feeder (see ‘
Add the paper ’ on page 130 ).
The Key operator can lock the paper-compartment door or disable the special
feeder. If the special feeder is disabled, you cannot select the special feeder in
the display screen.
Before you begin
■
In the Océ VarioPrint 2050-70 print command window, you can initiate the
print job on special material (see ‘
Start a print job on special material ’ on
page 87 ).
■
Make sure that the materials are with the correct specifications (see ‘ Input
trays, output bins and materials ’ on page 142 ).
How to print a job on special material placed in a paper tray
1
Open the paper-compartment door, place the required paper and close the door.
2
Select the job in the mailbox.
3
Activate the 'Paper' section.
Make sure that the 'Paper input' card is open.
Check that the required size is selected in the 'Size' function box.
[63] The Tray and the required paper size are selected
[63] The Tray and the required paper size are selected