Oce VarioPrint 2050-70, Руководство по эксплуатации

Страница: 122 / 174

122 Océ VarioPrint 2050-70 Job manual
Before you begin
■
To check that your scan job settings are correct, first make a test copy. Make
sure that the settings do not result in lost image information or grey borders.
How to make an enlarged or reduced digital document with the automatic document feeder
1
Place and align the originals face down in the automatic document feeder.
Follow the feed direction according to the dimensions and orientation of the
information on the originals.
2
Select the 'Scan' mode .
The 'Workflow' section opens automatically.
3
Select a 'Scan profile' with the Arrow keys .
4
Activate the 'Original' section.
Select '1-sided' or '2-sided' in the 'Original' function box.
5
Select the icon in the 'Original type' function box to define the orientation of
the information and the binding edge of the originals.
6
Activate the 'Digital document' section.
Make sure that the 'Page size' card is open.
7
Select the size and the orientation in the 'Size' function box.
Check that that the orientation matches the feed direction of the originals.
The enlargement or reduction is adjusted automatically.
[85] Select the size. The enlargement and reduction rate is adjusted automatically
[85] Select the size. The enlargement and reduction rate is adjusted automatically
8
Press the start key .