Oce VarioPrint 2050-70, Руководство по эксплуатации

Страница: 118 / 174

118 Océ VarioPrint 2050-70 Job manual
How to scan an A3 original on the platen
1
Place and align the original face down on the platen.
Use the short-edge feed direction.
2
Select the 'Scan' mode .
The 'Workflow' section opens automatically.
3
Select a 'Scan profile' with the Arrow keys .
4
Activate the 'Original' section.
Select '1-sided' in the 'Original' function box.
5
Select the icon in the 'Original type' function box to define the orientation of
the information of the original.
6
Activate the 'Digital document' section.
Make sure that the 'Page size' card is open.
7
Select the A3 size in the 'Size' function box.
[82] Select A3
[82] Select A3
Note:
If the required page size is not A3, you must adjust the enlargement or
reduction (see ‘Make an enlarged or reduced digital document’ on page 121).
8
Press the start key .