Oce VarioPrint 2050-70, Руководство по эксплуатации

Страница: 112 / 174

112 Océ VarioPrint 2050-70 Job manual
Types of scan job settings
Introduction
The Océ VarioPrint 2050-70 has default settings, defined by Océ or by the Key
operator.
When you place the originals in the automatic document feeder, some of the
default settings will change, according to the detected information. You can
change the settings for your scan job.
Default settings when you use the automatic document feeder
When you place the originals in the automatic document feeder, the Océ
VarioPrint 2050-70 proceeds as follows.
■
Detects the dimensions of the originals and selects the same or the most
acceptable size for the digital document.
■
Calculates the necessary enlargement or reduction.
Default settings when you use the platen
When you place an original on the platen, the Océ VarioPrint 2050-70 proceeds
as follows.
■
Does not change the default binding and information-orientation settings.
The dimensions of the original on the glass plate cannot be detected.
■
Does not change the default enlargement or reduction.