Oce TDS300, Руководство пользователя

Страница: 45 / 132

Use the Océ TDS300 to copy 45
Number of copies
To have multiple copies from one original, enter the number of copies on the
scanner operator panel. The original is scanned just once and the required
number of copies are processed.
Refer to ‘Product specifications Océ TDS300’ on page 105 for the limitation
of multiple copy jobs.
▼
Select the number of copies
1
Enter the number of copies (1 up to 99) with the ‘+’ or ‘-’ key on the scanner
operator panel.
The display shows the number of copies.
Select the use of roll 1 or roll 2 or manual feed
You can select between two rolls or manual feed with the ‘media’ key. When
a roll is selected, the copy material is taken from the selected roll.
Note:
Only use paper as specified in ‘List of available material types and sizes’
on page 109.
▼
Select roll 1, roll 2
1
Press the ‘media’ key until the indicator that matches your selection lights.
2
Enter the media width if you have selected ‘Manual feed’ (see ‘Media type and
size on the printer’ on page 23).
3
Set the correct media type settings (see ‘Set the media type settings’ on
page 24).
4
Press the confirm key.