Oce Saddle Finisher-AF2, Руководство пользователя

Страница: 15 / 61

Sort by page mode
All prints of the same original page are grouped together (111, 222, 333, for example).
Offset stacking mode
The printed output is shifted alternately to the front and back of the tray, in a vertical
(portrait) orientation, or a horizontal (landscape) orientation, depending on the orientation
of your originals. For example, if you place A4R or LetterR originals, the paper is output
and shifted in the horizontal direction. If you place A4 or Letter originals, the paper is
output and shifted in the vertical direction.
When you use the Offset stacking mode while Sort by set or Sort by page is selected, then
each set of prints is shifted the following amount before it is delivered to the output tray:
• No staple: each set is shifted 30 mm (1 1/4").
• Corner staple: each set is shifted 20 mm (3/4").
• Double staple: no shift between sets.
Staple mode
Prints are automatically sorted by set and stapled. When you carry out a copy job, the
prints are stapled at the following positions:
If an original is placed on the glass plate:
Right Side
Left Side
Right Side
Left Side
Upper Right
Upper Left
Lower Left
Lower Right
Double Staple Area Corner Staple Area
Upper Right
Upper Left
Lower Left
Lower Right
If originals are placed in the ADF:
Chapter 3 - Use the stacker/stapler 15
The finishing modes