Oce PP18C, Руководство по эксплуатации

Страница: 44 / 150

Using the Operator Panel
2-18 ADVANCED OPERATION GUIDE
e-MPS
e-MPS is an abbreviation for enhanced-Multiple Printing System which
implements the following functions that are available from the printer
driver:
• Job Retention
• Job Storage
In either job mode, when printing a document, the print data is transferred
from the computer to the printer then stored on the printer’s hard disk.
Since copies of the document are printed using the stored data, printing is
performed faster with less computer spooling time and less network traffic.
NOTE:
To use the e-MPS system, an optional hard disk must be installed
in the printer. For details, see Hard Disk on page 3-9 .
The RAM disk may also be used in the Proof-and-Hold and Private Print
modes. See
Using the RAM Disk on page 2-58 for details on RAM disk
setup.
Job Retention
Job Retention has four modes as summarized below. These modes are
selected from the printer driver through the application software:
Quick Copy Proof-and-Hold Private Print Stored Job
Primary function To later print
additional copies To proof the first
copy before printing
multiple copies To hold the
document in printer
to prevent
unauthorized
access To electronically
store documents
such as fax cover
pages
Start storing by Printer driver Printer driver Printer driver Printer driver
On terminating print
setting from
application software Prints
simultaneously Prints one copy
simultaneously Does not print Does not print
Retrieved by Operator panel Operator panel Operator panel Operator panel
Default number of
copies printed at
retrieval Same as storing
(can be changed) One less
(can be changed) Same as storing
(can be changed) One
(can be changed)
Maximum number
of jobs stored
†
32, expandable to
50 32, expandable to
50 Depends on the
hard disk capacity Depends on the
hard disk capacity
PIN security No No Yes Yes (if necessary)
Data after printing Stored Stored Deleted Stored
Data at power off Deleted Deleted Deleted Stored
†. Jobs in excess will cause the earlier ones to be deleted.