Oce PP18C, Руководство по эксплуатации

Страница: 106 / 150

Using the Operator Panel
2-80 ADVANCED OPERATION GUIDE
5 To change the timeout time, press [OK]
([ENTER]) . A blinking cursor (
_
) appears.
6
Press
U
or
V
to increase or decrease the value at the blinking cursor and
set the desired time. The timer can be set between
5
and
240
min, in 5-
minute increments. Use
Z
and
Y
to move the cursor right and left.
7
When the desired timeout time is displayed, press [OK] ([ENTER]) .
8
To exit the menu selection, press [MENU] .
Received Data Dump
You can print data received by the printer as hexadecimal code for
debugging programs and files.
1
Press [MENU] .
2
Press
U
or
V
repeatedly until
Others >
appears.
3 Press
Z
.
4 Press
U
or
V
repeatedly until
>Print
HEX-DUMP
appears.
5
Press [OK] ([ENTER]) . A question mark (
?
)
appears.
6 Press [OK] ([ENTER]) again. The message
Processing
appears for a second,
followed by
Waiting
.
7
While the message display is indicating
Waiting
(for 30 seconds by
default), send data to be hex-dumped to the printer. The message display
indicates
Processing
while the data is being received.
You can cancel printing of any more dump data by pressing [GO] and then
[CANCEL] .
>Sleep Timer
005min.
Others >
>Print HEX-DUMP
>Print HEX-DUMP?
Processing
Waiting