Oce PlotWave 340, Руководство по эксплуатации, Страница: 267 / 336

Load a media roll (position 2)
NOTE
When your printing system is equipped with an additional second media roll, it is advised to
load an A0 or E-size media roll on position 1 and an A2 or C-size media roll on position 2.
CAUTION
Watch your fingers when you handle the media roll.
CAUTION
When you want to load an A0 media roll on position 2 make sure to bend your knees, as
indicated below, to spare your back.
Procedure
1.
Pull firmly to open the media drawer.
2.
Place the new media roll on the roll loading station.
3.
Pull (1) the handle of the roll holder locking mechanism towards you.
Slide (2) the roll holder into the right side of the core of the new media roll.
Load a media roll (position 2)
Chapter 5 - Maintain the Printing System 267