Oce fx2081, Руководство пользователя

Страница: 39 / 80

3-4
3.3.3 Paper Size
Selects paper size for printing.
NOTE
• Select the paper size from the drop down list, which shows the paper
supported in the printer driver’s current setting. Paper sizes shown on
the drop down list are constrained by the “Paper Source” and “Com-
bine” settings. If you cannot find the desired size on the list, change the
paper source.
• Some applications override the printer driver’s paper size setting. To
avoid printing size errors, set the same paper size on both the applica-
tion and the printer driver.
q
Orientation
“Portrait” orients the print vertically. “Landscape” orients the print hori-
zontally.
q
Edit Custom…
Click this button when you want to add, change or delete your custom
paper size. You can add up to 50 custom paper sizes.
NOTE
The “Edit Custom” is not available when either of the following
conditions exists.
• The “Paper Source” setting is anything other than “Bypass Tray” or
“Auto”
• The “Combine” setting on the “Page Layout” tab is active.
To add a custom paper size:
1
Click [Edit Custom...].
2
Click [Add].
3
Enter a name that identifies the custom
paper. You can enter up to 20 charac-
ters.
4
Specifies the width and length of your
custom paper size.
5
Click [OK].
To delete a custom paper size:
1
Select the size that you want to delete.
2
Click [Delete].