Oce E1, Руководство пользователя

Страница: 16 / 55

Output locations
Introduction
The High Capacity Stacker-E1 has three output locations, that can be addressed separately.
Note:
If you use media which length in feed direction is longer than 229 mm (9.0"), the media
will output across both stack trays. In this case you can use only one stack tray, so then
you have two output locations.
Output locations
Output locations
#
Description Output location
This output location is mainly used for sample
prints. Output tray
This output location is used to stack a large volume
of sheets. Right stack tray (stack tray 1)
This output location is used to stack a large volume
of sheets. Left stack tray (stack tray 2)
Chapter 3 - Use the stacker 16
Output locations