Oce CS665 Pro, Руководство пользователя

Страница: 347 / 495

11 Application functions
11-42 CS665 Pro
11.14 Copying image in the center of copy paper: Image centering
Use this function to detect the image area of the original and center the whole image on copy paper.
1
Position the original.
– Both ADF and original glass are available.
2
Touch [Application] on the Copy Screen.
3
Touch [Image Centering] on the Application Screen.
– The incompatible function keys will be dimmed to show inactivity.
– Non-Image Area Erase will be selected automatically. If using ADF to scan the original, touch it to
deselect this function.
– If Book Copy is used in combination, the original smaller than the selected paper size will be printed
in the center of the copy paper without image division performed.
4
Touch [OK] on the Application Screen.
The Copy Screen will be restored, with highlighted [Non-Image Area] and [Image Centering] keys
displayed under the [Application] key.
These keys can also be used to display the Application Screen for making setting change.
Auto Zoom and Auto Paper Select are released and e 1.0 magnification is selected automatically.
Available copy modes are 1->1 and 1->2. Selecting [1->2] will select [Separate Scan] automatically.
5
Enter the desired print quantity from the control panel keypad, then press [Start].
The machine will start printing when ready for output.
2
Reminder
Image Centering may perform incorrectly if the lighting in the work place is directly over the original
glass. In this case, consult your service representative about an appropriate place for installation.