Oce ColorWave 900, Руководство пользователя

Страница: 269 / 320

Patterns in area fills (herringbones)
Script
Step Action
1 Check whether the media roll you use is almost empty. If yes load a new media roll
(see
Load a media roll on page 66
).
2 When you have recently placed a new printhead, perform the 'Replace printheads'
procedure to re-seat the new printhead (see
Replace printheads on page 227
).
3 Check whether the problem is resolved by printing a suitable test print. If the problem
persists, clean the print surface and the vacuum holes (see
Clean the print surface and
the vacuum holes on page 203
).
4 Check whether the problem is resolved by printing a suitable test print. If the problem
persists, replace the printhead (see
Replace printheads on page 227
).
5 Check whether the problem is resolved by printing a suitable test print. If the problem
persists, call your local Service Provider.
Patterns in area fills (herringbones)
Chapter 10 - Troubleshooting 269