Oce ColorWave 650, Руководство пользователя

Страница: 276 / 336

Set the 'Spool threshold'
Introduction
When the job memory is full the printer can not receive new jobs. You can tune the
'Spool threshold' to define the spool capacity for specific job types. Allow a higher capac-
ity for small jobs if you select Low. Select High if you want to reduce the risk of aborting
file transfer of large print jobs if the job memory is full.
You can choose one of following values.
• 'Low'
Select this value if you want to allow a higher capacity for small print jobs.
• 'Normal'
This is the default setting.
• 'High'
Select this value if you want to reduce the risk of aborting file transfer of large print
jobs when the job memory is full.
Before you begin
This setting is editable for the Key operator or Power user.
How to set the Spool threshold
1.
Click 'Preferences' - 'System properties'.
2.
Click 'Edit' in the 'Printer properties' bar or click the value of the 'Spool threshold' setting.
3.
Select the correct value.
Select 'Low' if print productivity is an important factor.
4.
Click 'Ok' to confirm your entries or 'Cancel' to reject your entries.
Chapter 8 - Print quality and Print productivity 276
Set the 'Spool threshold'