Oce BLM 500, Руководство пользователя

Страница: 93 / 106

93
Install New Stitch Wire
Install the Stitch Wire into the Stitch Head
[59]
Close the Océ BLM500
[60]
Step Action Information
1 Pull the stitch wire from the
end of the stitch wire guide.
2 Make sure the stitch wire runs
behind the gas-strut.
[55]
3 Feed the end of the stitch wire
between the felt
wire-cleaning pads.
[56]
Detail A: Felt Wire-Cleaning Pads
4 Push the stitch wire into the
stitch wire guide block.
[57]
Push stitch wire in direction of arrow
5 Push the stitch wire as far as
possible.
[58]
Detail A:Make sure the stitch wire runs
between the wire feed rollers and into
the middle wire tube.
A
A
Step Action Information
1 Close the stitch wire cabinet.
2 Lower theOcé BLM500 main
deck. ( see ‘Lower the Clincher Frame’ on
page 38 ).
3 Lower the clincher frame.