Oce BLM 500, Руководство пользователя

Страница: 82 / 106

82 Chapter 6 Maintenance
Clean the Former Roller
Clean the Former Roller
When to do
Clean the former roller if the spines of the books are dirty. Ink and toner can collect
on the former roller.
Required tool
Clean, plain paper that is not printed. A3 size (USA: 11 x 17”) is recommended.
4mm thickness is needed for each cycle. More than one cycle can be needed.
[48]
Result
The book is delivered to the stacker. Check the book. Repeat the procedure until the
book spine is clean.
Step Action Information
1 Enter the correct settings on
the touch screen.
■
Set the touch screen to the
correct PAPER SIZE
■
Set the SET THICKNESS to
4.0
■
Set the number of STITCHES
to 0.
■
Set the number of FORMS to
4.
2 Touch START
3 Open the connecting bridge
cover.
4 Lift the gathering area cover.
5 Put 4mm of clean paper in the
gathering area.
6 Press the two orange buttons
and hold for 9 seconds, or until
you hear the folder operate.