Oce Arizona 318 GL, Руководство пользователя

Страница: 54 / 224

Tools and Utilities Module
Introduction
The Tools and Utilities Module has six sub-modules: Shutdown, Job Manager, Special Prints, Ink
Flush, Spit Catcher Alignment, and the System Logs. When you click on the Tools and Utilities
tab, Special Prints always appears first. Click on the other icons to access the sub-modules.
•
Shutdown provides a clean way to properly power down the printer.
• Job Manager allows you to manage the view of print jobs.
• Special Prints provides special prints for various purposes, such as reference, adjustment and
alignment etc. Some are for operator use and others are for service technician use only.
• Ink Flush clears the selected color ink line. This is used when you change to a different kind of
Océ-approved ink and need to flush out all of the existing ink.
• Spit Catcher Alignment allows you to adjust the carriage position over the spit catcher after
you install it.
• System Logs allows the operator to generate log files for service diagnostics and
troubleshooting purposes.
Illustration
[32] Job Manager
Shutdown
Use the Shutdown icon when you need to turn the printer power off. The printer should be left
powered On at all times but there are some exceptions such as some service procedures, or if the
printer requires a reboot.
Job Manager
The Job Manager allows you to view a select range of print jobs or to delete many print jobs at
the same time. In the Print Job module, you can only manipulate one print job at a time. In the
Job Manager you can select multiple print jobs using the checkbox to the left of each job. Once
Tools and Utilities Module
54 Chapter 4 - How to Navigate the User Interface