Oce Arizona 318 GL, Руководство пользователя

Страница: 38 / 224

Operator Interface Hardware
Introduction
The Operator interacts with printer components to print, maintain, and monitor the state of the
printer. This section identifies and explains the functions of the hardware.
[28] Printer Hardware
Operator Interface Components
Hardware Interface Components
Component Function
1) Main Power Switch Turns the printer On and Off.
2) Operator Control Sta-
tion Consists of a podium stand, an LCD display monitor, a mouse, and
an emergency stop button. The printer control software is displayed
here.
3) Vacuum Zone Control Three vacuum zone control handles determine which of the three
print zones on the printer table will be active when the vacuum pump
is switched on.
4) Vacuum Table Foot
Switch Toggles the pump to turn the table vacuum on/off. Vacuum must be
on prior to starting a print.
5) Vacuum Bleed Valve Adjusts the level of vacuum suction applied to the media. Less vac-
uum reduces artifacts caused by suction when imaging on flexible
media.
6) Print Button Starts the print job.
7) Printer Status Beacon Indicates printer status. See Chapter 3 for details.
8) Emergency Stops Shuts down all motion and hazardous systems. See chapter 3 for de-
tails.
9) Maintenance Station Designated area for cleaning the print heads and the underside of the
carriage.
10) Coolant Reservoir Provides the ability to monitor and maintain the correct coolant level.
11) Ink Filters Ink filters remove unwanted particulate matter from the ink. 4
Operator Interface Hardware
38 Chapter 4 - How to Navigate the User Interface