Oce arizona 1240 GT, Руководство пользователя

Страница: 24 / 212

Safety Awareness
Introduction
This section contains two sets of principles that must be followed to assure maximum safety
when operating your Océ Arizona printer. The first set uses negative examples to show you
things to avoid in order to prevent injury to the operator. The second set of principles illustrates
some of the residual risks that are inherent in the operation of the printer. These are situations or
physical aspects of the printer that may present a potential danger to the operator, but would
compromise the capabilities of the printer if changed. Therefore, they are pointed out as a
precaution the operator must be aware of when using the printer.
IMPORTANT
The photos in the following table illustrate situations that must be avoided when operating your
printer.
Situations and Actions to Avoid
How NOT to use the printer
Avoid these Situations For Your Personal Safety
[10] Keep the table clear
Do not place your hand
in the carriage pathway
when printer power is
on. Do not leave any ob-
jects on the table printing
surface, except for media
that you will print on. Al-
so make sure the media
is 48 mm (1.89 inches) or
less in thickness.
[11] Avoid Carriage Movement
Do not push or force the
carriage to move man-
ually if it is already in
motion. If you do move
the carriage, a Motion Er-
ror message will display
and you will have to use
the mouse to click Reset
on the user interface LCD
display.
4
Safety Awareness
24 Chapter 3 - Safety Information
Océ Arizona 1200 Series