Oce 760c, Руководство по настройке

Страница: 32 / 200

2
2-8 Setting up Network Servers
Océ 760C on a NetWare 4.x or 5.x network
The NetWise ™ features built into the Océ 760C support the following network
operating environments:
• NetWare 4.x or 5.x—NDS (Novell Directory Services)
• Servers running NetWare 4.x or 5.x in bindery emulation mode
For Ethernet-based networks, the IPX/SPX protocol is supported. For Token
Ring-based NetWare networks, both IPX/SPX and TCP/IP are supported.
N
OTE
:
Setting up a NetWare environment correctly requires the presence and active
cooperation of the Novell network administrator. You must have administrator
privileges on the network to create new NDS or bindery objects.
The term “bindery server” is used to refer to a Novell file server running NetWare 4.x
or 5.x in emulation mode. The term “NDS” is used to describe components of a
NetWare operating system running NetWare 4.x or 5.x in native mode.
NetWare clients print to the Océ 760C through the Novell network server. Server
setup and client network setup are outlined in this chapter, client printing setup is
described in the
User Software Installation Guide , and printing is described in the
Printing Guide .
The Océ 760C can receive print jobs from NetWare clients over Ethernet or Token
Ring network topologies. (For information on the Token Ring option, see
Appendix A.) During Océ 760C Setup, you select the frame type or types that will be
used for communication between the Océ 760C and network servers. Frame type
refers to the format of a communications packet; frame types are specified in a startup
file when the NetWare server (or any other workstation) loads its network drivers.