Oce 1000C Скачать руководство пользователя страница 83

Страница: 83 / 206

3-25

Archiving jobs

• Remove Raster Data

• Properties

ARCHIVE

JOB

In the Active Jobs window, select any held job.

Choose Archive from the Actions menu.

To archive the job internally to the Océ 1000C hard disk drive or the ZIP drive,
click OK.

The job is archived internally and appears in the Archive panel of the Jobs window.

To archive the job externally to the Command WorkStation or Command WorkStation
LE hard disk drive or to a device on the network, click Add.

Browse to the device and folder to which you want to archive the job and click OK
(Command WorkStation) or Choose (Command Workstation LE).

The Archive Options dialog box displays external devices as available archive volumes.

In Command WorkStation, if applicable, select Archive rasters in the Archive Options
dialog box.

The Archive rasters option is not available for PostScript data jobs and jobs archived to
Server Internal.

OTE

Large raster data files may take considerable time to archive.

Select an archive volume and click OK.

Archived jobs appear in the Archive panel of the Jobs window.

Click to add a device

Содержание 1000C















































































































































































































Результаты поиска

Содержание 1000C

Отзывы:

Похожие инструкции для 1000C

Бренды по названию

Популярные бренды

Oce 1000C, Руководство по управлению заданиями

Результаты поиска

Содержание 1000C

Отзывы:

Похожие инструкции для 1000C

Бренды по названию

Популярные бренды