Oce 1000C, Руководство по управлению заданиями

Страница: 53 / 206

2
2-27 Preparing to work with Command WorkStation or Command WorkStation LE
Temporary path
—Specifies the folder where Command WorkStation temporarily stores
copies of the jobs you edit or change. Change the temporary path by clicking Browse
and specifying a folder.
Imposition: Units
—Specifies the units of measurement used to display attributes, such
as page sizes and custom sizes, in the Job Properties dialog box and Imposition
window.
Imposition: Template Path
—Specifies the folder where template files for imposition are
stored for later use. To change the template path, click Browse and specify a folder.
Search: Template Paths
—Specifies the folder where Find/Search templates are stored
for later use. To change the template path, click Browse and specify a folder.
T
O SET PREFERENCES FOR
C
OMMAND
W
ORK
S
TATION
LE
†
1. Choose Preferences from the CWS LE menu.
The Preferences dialog box appears.
2. Specify the desired preference settings, and click OK to save your settings.
You can specify the following preferences:
Show Import Options Dialog
—Displays a dialog box that allows you to specify the
destination queue (Hold or Print) for each job imported into Command WorkStation
LE.
Use Metric Units
—Specifies the units of measurement used by Command WorkStation
LE to display values that you enter manually in the Job Properties dialog box.
Show Animations
—Enables the display of animated graphics in the Activity Monitor
(see page 2-8 ).