manualshive.com logo in svg

Observint R16, Руководство пользователя

Поделиться
Скачать
Observint R16 Скачать руководство пользователя страница 66

60

www.Observint.com

 

—

Video events can be played back instantly by clicking in icon the 

Playback

 column. Right-click to return to your search 

results.

 

—

Use the icons in the lower right corner of the screen to move between pages of system log events.

6.  To backup the log you found: 

a.  Plug a flash drive for your log backup into a USB port. 
b.  Click 

Backup

 to copy the search result to a flash drive.

c.  When the backup menu appears, navigate to the folder on the flash drive where you want to save the file. 
d.  Click 

OK

 to begin copying the file. Allow the backup operation to complete before continuing. 

8.3.2  Load Default

You can reset the DVR settings to its out-of-box state. You can reset all settings, or just settings on specific menus. Restoring default 
settings will not delete recordings and snapshots saved to the hard drive.

To load defaults, gheck the items you want restore to default, or check Select All to choose all items, and then click 

Apply

 to load 

default settings of your chosen items.

8.3.3  Upgrade

Use the Upgrade feature to replace the firmware in the recorder with a newer version. 

1.  Copy the firmware file (.sw filename extension) to a USB drive. 

SECTION 8: SYSTEM SETTINGS

Содержание R16














































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды