Observint HDV-SYSNB2WFL, Руководство пользователя

Страница: 29 / 68

29
Show Message: Click and select ON to display a message on the screen when a No Space
on Disk
,
Disk Error
, or
Video Loss
event occurs. Select
OFF
to disable these messages.
Send Email
: Click and select ON for the NVR to send an automated email when an event
occurs. Select OFF to disable this feature.
5.4 Network
Use this menu to configure network parameters.
5.4.1
General
If your router provides a DHCP server, check the
DHCP
select box to use DHCP to assign network
compatible parameters for your Wire-Free NVR. If you don’t use DHCP, you can manually assign the
following network parameters.
NOTE: All network parameters must be compatible with other
devices on the network.
IP Address : The IP address identifies the Wire-Free NVR in the network. It consists of four groups of
numbers between 0 to 255, separated by periods. For example, “192.168.001.100”.
Subnet Mask : Subnet mask is a network parameter which defines a range of IP addresses that can
be used in a network. If IP address is like a street where you live then subnet mask is like a
neighborhood. The subnet address also consists of four groups of numbers, separated by periods.
For example, “255.255.255.000”.
Gateway : This address allows the Wire-Free NVR to access the Internet. The format of the
Gateway address is the same as the IP Address . For example, “192.168.001.100”.