Manual | NEP-5000-LINK
Status: Final | Not confidential
Page 33 | 34
V20200304
10.3 Calibration
Calibration should only be performed by experienced users who intend to configure the sensor in a
different mode.
Default calibration setup
Communication
TTL
Protocol
Windows: Digital free-flow only
Android: Digital free-flow only
Auto-wipe
Recommended
Auto-range
Recommended
In order to calibrate, you will need complementary modules not included in this kit: The calibration cable
and the calibration module can be purchased separately. Alternatively, you can send the module back to
Observator Instruments for calibration.
Before calibrating the sensor, please read
Chapter 10
of the
available on our website.
10.4 Long-term storage
In order to increase the life-expectancy of NEP-5000-LINK products, we highly recommend you to switch
off the long-term storage internal switch on the Bluetooth module.
Note: The internal switch should be only used to turn off the unit if the device is in storage more than
six
months or when transporting by air. Normally it is best to leave it on the “ON position” with the
cover closed at all times.
Switch-off the long-
term storage switch
