TD851W
150Mbps Wireless N ADSL2+ Modem Router User Guide
2) NTP
Figure 4-57
¾
State:
Indicate the current state of NTP function. Choose to enable the NTP or not.
¾
Server/Server2:
Enter the IP address or the host name of the NTP server.
¾
Interval:
The interval time of NTP function.
¾
Time Zone:
The time zone in which the device resides.
¾
Get GMT Time:
After setting the NTP configuration correctly, click this button to start the NTP
function. Then you can see the GMT time obtained from NTP server.
)
Note:
If changes are made, after clicking
Apply Changes
button, a
Save
button will appear on the left
panel. You need to click the
Save
button to make your changes take effect.
4.6.5 Log
Choose “
Maintenance
→
Log
”, you can view and configure the logs of the Modem Router (shown
in Figure 4-58).
76
