Objet Eden260, Руководство пользователя

Страница: 55 / 122

DOC-00260 Rev. A1
5–21
Eden260 User Guide
Object Color
Codes
To view the color code for objects displayed:
¾
From the Tools menu, select
Constraints Settings
.
Figure 5-27: Constraints Settings dialog box, showing object color codes
To change the color settings:
1. Click the current color displayed in the Constraints Settings dialog box.
2. From the color palette that opens, select a color and click
OK
.
Note: The color of objects already displayed does not change
automatically. The color change tales effect the next time an object’s
state is changed.
Production
Estimate
Objet Studio enables you to calculate the time and material resources
needed for producing trays before sending them to the Eden printer. The
time it takes Objet Studio to make this calculation depends on the number
of objects on the tray and their complexity. Calculating the production
estimate for a full tray could take up to 15 minutes, depending on your
computer’s specifications. The results displayed are accurate within 10
percent of the actual resources needed.
To calculate the time and materials needed for producing the current
tray:
¾
From the Tools menu, select
Estimate Consumptions
.
or—
¾
Click .
When Objet Studio finishes calculating the production resources, the
results appear at the bottom of the screen.
Figure 5-28: Production resource calculation
Saving the
Tray File
Trays are saved as otf files. You can save a tray before it is ready for
production, and open it at another time to continue preparing it. When you
send the tray to the Eden 3 ‐ D printer, it is first saved. If the tray was
previously saved, the original file is overwritten at this time.