Objet Eden260, Руководство пользователя

Страница: 53 / 122

DOC-00260 Rev. A1
5–19
Eden260 User Guide
Surface Finish
Models can be produced with a matte or glossy finish. To create a matte
finish, the model is completely surrounded by a thin layer of support
material.
Models produced with a glossy finish are printed with a resolution of 300
dpi (dots per inch) along the Y ‐ axis, instead of the standard 600 dpi
resolution.
Note: You can print a tray that contains models having both glossy and
matte finishes. However, they will all be printed with a Y-axis
resolution of 300 dpi.
Spin Mode When used with and , the movement of
the build tray continues after you release the
mouse button. To stop the movement, click in
the active view pane or click one of these icons.
Zoom In Each mouse click zooms one step to the center
of the active viewing pane.
Zoom Out Each mouse click zooms ‐ out one step from the
center of the active viewing pane.
Pan Left Each mouse click moves the build tray to the
left in the viewing pane by one step.
Pan Right Each mouse click moves the build tray to the
right in the active viewing pane by one step.
Pan Up Each mouse click moves the build tray up in
the active viewing pane by one step.
Pan Down Each mouse click moves the build tray down in
the active viewing pane by one step.
Advance Forward The same as . Each mouse click zooms in to
the tray displayed in the active viewing pane.
Advance Backward The same as . Each mouse click zooms out
of the tray displayed in the active viewing
pane.
Rotate Left Each mouse click rotates the build tray to the
left in the active viewing pane by one step.
Rotate Right Each mouse click rotates the build tray to the
right in the active viewing pane by one step.
Rotate Up Each mouse click rotates the build tray up in
the active viewing pane by one step.
Rotate Down Each mouse click rotates the build tray down in
the active viewing pane by one step.
Camera Displays a virtual camera and its viewing angle
of the tray.
Icon Tool Tip Name Purpose