Objet Eden260, Руководство пользователя

Страница: 49 / 122

DOC-00260 Rev. A1
5–15
Eden260 User Guide
Changing an
Object’s
Orientation
There are several methods for changing the orientation of objects on the
build tray.
To rotate an object:
¾
Select the object and use the Rotate icon or Object menu options (see
“Repositioning Objects” on page 5 ‐ 11).
To select an object’s plane and re-align it with one of six basic directions:
•
From the Plane Alignment toolbar:
1. Click the Select Plane icon .
2. Click a plane on an object displayed on the build tray.
3. Click the appropriate align icon—
•
From the Tools menu:
1. Select
Plane Alignment > Select Plane
.
2. Click a plane on an object displayed on the build tray.
3. Select
Plane Alignment > Align Bottom/Top/Front/Back/Left/Right
(as
appropriate).
Note: When you are finished re-aligning the plane of objects on the build
tray, release the
Select Plane icon or
clear Select Plane from the
Tools > Plane Alignment menu.
To flip an object 180 degrees on any axis:
1. Select the object.
2. From the Object menu, select
Flip > Flip X / Flip Y / Flip Z
.
To make precise changes to the object’s orientation on any axis:
1. Select the object.
2. Display the Transform tab or the R. Trans. tab of the Entities Properties
dialog box (see figures 5 ‐ 16 and 5 ‐ 17 on page 5 ‐ 12):
or—
From the Object menu, select
Relative Transform
(see figure 5 ‐ 18 on
page 5 ‐ 13).
3. Change the Rotate values for the desired axis.
Align Bottom
Align Top
Align Front
Align Back
Align Left
Align Right