Copyright 2010-2017 Obihai Technology, Inc.
241
Up to 20 individual prompts may be recorded through the device IVR interface (see
Telephone-IVR-Based Local
Configuration
section). These prompts may be backed up into a single file from the web browser. The default name of
the file is “backupaa.dat”. The backup file also includes the annotations entered for each recorded prompt.
To restore an AA prompt file onto an OBi, do it exactly like a firmware upgrade via the web browser but provide the
device with the prompt file instead of a firmware file. The OBi can detect from the file header that you are trying to
upload a prompt file and process the file accordingly.
Warning: All the existing prompts in the device will be removed
first when applying the backup file; this process cannot be undone
.
Backup Configuration
The current configuration of the OBi device can be backed up and stored as a file in XML format at a user specified
location. The default name of the file is “backup
xxxxxxxxxxxx
.xml”, where t
he
xxxxxxxxxxxxx
x represents the MAC
address of unit.
When backing up
a device’s configuration
, you may select the following three options before selection of the
“Backup”
.
When the file browser window pops up for, you can change the filename and choose the location to save the backup
file. Note that different web browser might handle this differently. If the operation is blocked due to the security
setting of the web browser, you should change the security setting temporarily to allow this operation to complete.
Restore Configuration
When restoring the configuration to a previous backup copy, you will need to specify the backup file you want to
restore to by selecting
the “Browse” butto
n in the Restore Configuration section of the web page. Then, select the
“Restore” button to start the process. The OBi device will automatically reboot, after the restoration is co
mplete.
IMPORTANT Note:
All passwords and PINs are excluded from the backup file. Hence they will not be available to
restore. Call history is excluded from the backup, but can be saved as an XML formatted file separately from the Call
History web page.
Reset Configuration (to Factory Default)
The OBi device may be reset to factory default condition. Call history and various statistical information will be
removed at the same time. Resetting the device configuration should be used with
extreme caution
as the operation
cannot be undone. To do this you press the
“Reset” button in the Reset Configuration section. A confirmation window
will pop up. The OBi device then proceeds to reset the configuration once you confirm that this is indeed what you
want to do. The OBi device will reboot automatically when factory reset is completed.
Service Provider Configuration Parameters
ITSP Profile
X
–
General Web Page (
X
= A, B, C, D, E, F)
The following configuration parameters are available on this page.
Parameter
Description
Default Setting
Option
Description
Default Setting
Incl. Running Status
If checked, the value of all status parameters will be included in backup
file. Otherwise, status parameters are excluded from the backup
No
Incl. Default Value
If checked, the default value of parameters will be included in the
backup file. Otherwise, default values are excluded from the backup
No
Use OBi Version
If not checked, the backup file uses XML tags that are compliant with TR-
104 standard. Otherwise, the backup file will be stored in an OBi
proprietary format where the XML tags are not compliant with TR-104;
but the file size will be smaller and the file will be more readable
No
