GB
18
•
Keep batteries away from metal objects that could
cause short circuiting when not in use. There is a
risk of injuries and fires.
•
Fluid can escape from the battery when used
incorrectly. Battery fluid may result in skin irrita-
tions and burns. Avoid contact! In the event of
accidental contact, rinse thoroughly with water.
Immediately seek the aid of a physician in the
event of eye contact.
Device-specific safety instructions
•
The product must be standing on an even, hori-
zontal surface with clearance to all sides.
•
The product may not be operated outdoors.
•
Never put objects through the protective grille into
the product.
•
Objects that can be pulled (e. g. curtains, plants),
must not be in the immediate vicinity.
•
Never expose the product to water or other liq-
uids.
•
The product must not be operated in rooms with
bathtubs, showers or swimming pools or near to
wash basins or water connections.
•
Remember that moving parts may also be located
behind ventilation and venting slots.
•
Symbols appearing on your device may not be
removed or covered. Signs on the device that are
no longer legible must be replaced immediately.
The variant of the product sold in Switzerland may
only be used in Switzerland, as it is equipped with a
Swiss plug.
You can identify the variant by means of the item
number on the product (the instructions always con-
tain
all
item numbers):
•
Item number Switzerland: 481970
•
Item number in other EU countries: 481954
Structure and parts
1. Front guard
2. Small blade
3. Large blade
4. Locking nut
5. Back guard
6. Fan head
7. Fan body
8. Lifting tube parts
9. Base fasten nut
10. Base
Scope of delivery
•
Height-adjustable, swivelling free-standing fan
•
Remote control
•
Instructions for use
Assembly instructions
– Assemble sequence of the foundation and other
parts as follow:
– Unpack the fan and remove all the parts from the
package.
– Insert the lifting tube into the hole located on the
bottom, then use nut fix it tightly.
– Loose the locknut for lifting and draw out the lift
tube to a certain length, and then fasten the lock-
nut back tightly.
– Loose the locknut on the fan body, insert the body
to lifting tube and tighten the nut.
– Take off the nut and motor shaft protection part,
align the back cover into fan head and tighten the
nut clockwise.
– Insert the large and small blade and tighten the
nut anti-clockwise.
– Cover the front grill.
– The front grille is fastened with a click system
Operation instructions
– Set the power key
[
]
to position off.
– Insert the plug directly into a standard AC socket-
outlet. Be sure plug fits tightly into outlet.
– Press the button
[Speed]
to start the fan and
select the fan speed level, as perthe following
sequence: 1
→
2
→
3
→
4
→
5
→
6
→
1
– The fan speed selecting can be circulated and the
speed pilot lamp will be on during the fan operat-
ing.
– Press the button
[Mode]
to choose your desired
wind mode as per the following sequence: normal
wind
→
nature wind
→
sleeping (Breezing)
wind
→
normal wind
– The wind mode selecting can be circulated and
the wind mode pilot lamp will be on during the fan
operating.
– Set the time by pressing the
[Timer]
button to
select a desired timing level, the range is between
1–15 hours. The pilot light corresponding to the
selected timing level will be illuminated.
– The addition of the illuminated control lamps cor-
responds to the set time.
– Press the
[OSC]
knob to select whether you need
to let it shake head, as per the following
sequence: Oscillation
→
Not oscillation
→
Oscil-
lation
Read and observe the instructions for use
before using the product for the first time.
DANGER! Risk of death through electric
shock!
The use of this variant outside Swit-
zerland is not permissible for safety reasons,
as this poses a risk of electric shock or fire.
Note:
The fan is packaged with its founda-
tion and/or other parts unattached. You must
attach them before operating the fan.
WARNING! Risk of injury!
Never operate
without its foundation and/or other parts
attached. Do operate the fan only in upright
position; any other position could create a
hazardous situation.
Note:
Before using the fan make sure that it
is on a flat and stable surface.
Damage may occur if it is placed on an
incline or decline.
Содержание 481954
Страница 3: ...3 Montage Montaggio Assembly Montáž Montaż Szerelés Montaža Монтаж Монтаждау 1 2 3 4 5 6 ...
Страница 62: ...62 ...
Страница 63: ...63 ...
