home-made chips, follow the steps below.
1. Choose a variety of potato recommended for making chips. Peel the
potatoes and cut them into equal thickness chips.
2. Soak the potato chips in a bowl of cold water for at least 30 minutes,
drain them and dry them with a clean, highly absorbent tea towel. Then
pat with paper kitchen towel. The chips must be thoroughly dry before
cooking.
3. Pour 1 tablespoon of oil (vegetable, sunflower or olive) in a dry bowl, put
the chips on top and mix until they are coated with oil.
4. Remove the chips from the bowl with your fingers or a kitchen utensil so
that any excess oil stays behind in the bowl. Place the chips in the bowl.
5. Note: Do not tip the container of oil coated chips directly into the bowl in
one go, otherwise excess oil will end up at the bottom of the bowl.
6. Fry the chips according to the instructions in the section Cooking guide.
Cleaning
Clean the appliance after every use.
The bowl and the grids have a non-stick coating. Do not use metal kitchen
utensils or abrasive cleaning materials to clean them, as this may damage
the nonstick coating.
1. Remove the mains plug from the wall socket and let the appliance cool
down.
Note:
Remove the bowl to let the appliance cool down more quickly.
2. Wipe the outside of the appliance with a damp cloth.
Clean the bowl, the grids and the water tank with hot water, some
washing-up liquid and a non-abrasive sponge. You can use a degreasing
liquid to remove any remaining dirt.
Warning:
the bowl, the grids and the water tank are not dishwasher
safe.
Tip:
If dirt is stuck at the bottom of the bowl and the grid, fill them with
hot water and some washing-up liquid. Let the bowl and the grid soak
for approximately 10 minutes. Then rinse clean and dry.
3. Wipe inside of the appliance with hot water and a damp cloth.
4. Clean the heating element with a dry, cleaning brush to remove any food
residues.
5. Do not immerse the appliance in water or any other liquid.
Cleaning after steam use
1. Unplug the appliance after use.
2. Press to launch the purge of the water circuit in order to remove
residual water from the water circuit.
3. When the program is finished, take the bowl out of the appliance and
empty the residual water from the bowl.
4. Wash the bowl, the water tray and the water tank in warm water and
washing up liquid, rinse and dry.
Note:
For the appliance to function properly, it is necessary to carry out
regular cold descaling. To do this, always use the dedicated function .
67
Содержание 3045380022232
