3
Installing/ Replacing The Batteries
1. Remove the battery cover.
2. Insert four "AA" batteries and ensure correct polarity (as marked inside the battery compartment).
• If the battery low symbol ( ) appears on the display, turn off the monitor, then replace all batteries at the
same time.
• The measurements continue to be stored in memory even after the batteries are replaced.
Using The Optional Ac Adapter
1. Insert the AC adapter plug into the AC adapter jack on the rear side of the main unit.
2. Plug the AC adapter into an electrical outlet.
3. To disconnect the AC adapter, unplug the AC adapter from the electrical outlet first and then remove the AC adapter
plug from the main unit.
Touch Screen Switch
The innovative touch screen display functionality can be activated or disabled easily at anytime
with ON/OFF touch screen activation switch. Please keep the touch switch in "ON" position to
operate the monitor.
OFF
ON
System Settings
1. Ensure the Touch Screen Switch in "ON" Position.
2. Date/Time Setting
• With the unit switched off, simultaneously press the
MEM
button and
START
button for 3 seconds. The entry to the
month flashes.
• Press the
MEM
button repeatedly until the desired number for the month appears.
• Press the
START
button to accept the setting. Now the entry to the day flashes.
• Proceed in exactly the same manner when entering the day, hour and minute.
• In each case, press the
MEM
button to select and the
START
button to accept the entry.
PREPARATION
3. Voice Language Setting
• With the unit switched off, select the desired voice language by pressing and holding the
MEM
button.
• Now the screen will cycle through "L0", "L1", "L2" and "L3".
Once you change the batteries, the date
and time must be set again. The time is
expressed in 24-hour military time.
Month
Day
Hour
Minute
L0 = Voice Function is off
L1 = English
L2 = German
L3 = Spanish
» The monitor will say the corresponding language
with the displayed language code.
• Once the desired language has been heard, release the
MEM
button.
• After the desired language has been selected, a bar will appear on the
side of the screen. You can adjust the volume by pressing and holding
the
MEM
button again.
• Once the volume reaches the desired level, release the
MEM
button.
• The unit will automatically turn off after the desired volume level has
been set.
