1
POOL
SENTINELLE
OVAL CONTOUR SYSTEM
Specific instruction sheet
Note : This instruction sheet manual includes installation instructions for
specific items related to the SENTINELLE OVAL pool. All the other steps must
be followed in the main instruction manual.
1- SUPPORT POSTS INSTALLATION
Insert the post base on the junction plate. Be sure that the plate hooks
are inserted in the post base openings. (figure 1.1)
Insert a 1 inch screw (Q) on each side of the post base
in the screw holes. (figure 1.2)
Insert the two tabs of the securing hook in the
openings on top of the post. The part must not be too
tight initially because it will need to be pulled out
when installing the liner. (figure 1.3)
When the liner is installed, re-install the
securing hook. A mallet could be necessary to insert it
tightly. After this step, the post should be lined up
against the wall. (figure 1.4)
Figure 1.3
Figure 1.1
Figure 1.2
Figure 1.4
