![background image](http://html1.mh-extra.com/html/oase/aquamax-eco-premium-4000/aquamax-eco-premium-4000_operating-instruction_3274038011.webp)
- EN -
11
Hazards encountered by the combination of water and electricity
•
The combination of water and electricity can lead to death or severe injury from electrocution, if the unit is incorrectly
connected or misused.
•
Prior to reaching into the water, always switch off the mains voltage to all units used in the water.
Correct electrical installation
•
Electrical installations must meet the national regulations and may only be carried out by a qualified electrician.
•
A person is regarded as a qualified electrician if, due to his/her vocational education, knowledge and experience, he
or she is capable of and authorised to judge and carry out the work commissioned to him/her. This also includes the
recognition of possible hazards and the adherence to the pertinent regional and national standards, rules and regula-
tions.
•
For your own safety, please consult a qualified electrician.
•
The device may only be connected if the electrical data of the device and the power supply coincide. The device data
is to be found on the device type plate, on the packaging or in this manual.
•
Ensure that the unit is fused for a
rated fault current of max. 30
mA by means of a fault current protection device.
•
Extension cables and power distributors (e.g. outlet strips) must be suitable for outdoor use (splash-proof).
•
Protect the plug connections from moisture.
•
Only plug the unit into a correctly fitted socket.
Safe operation
•
Never operate the unit if either the electrical cables or the housing are defective!
•
Do not carry or pull the unit by its electrical cable.
•
Route cables/hoses such that they are protected from damage and do not present a tripping hazard.
•
Only open the unit housing or its attendant components, when this is explicitly required in the operating instructions.
•
Only carry out work on the unit that is described in this manual. If problems cannot be overcome, please contact an
authorised customer service point or, when in doubt, the manufacturer.
•
Only use original spare parts and accessories for the unit.
•
Never carry out technical modifications to the unit.
•
Power connection cables cannot be replaced. If a cable is damaged, dispose of the respective unit or components.
•
Only operate the unit if no persons are in the water.
•
Keep the socket and power plug dry.
•
The impeller unit in the pump contains a magnet with a strong magnetic field that may affect the operation of pace-
makers or implantable cardioverter defibrillators (ICDs). Always keep magnets at least 0.2 m away from implanted
devices.
Installation
The unit can be placed submerged or dry.
Always place the unit below water level.
Place the unit horizontally on the ground ensuring its stable position.
Connect the unit
B
Recommendation for the use of the stepped hose adapter and hose connector:
AquaMax Eco Premium 4000/6000:
•
Second inlet (1): Stepped hose adapter 25 to 38 mm (1 to 1½ ")
•
Pump outlet (2): Hose connector 38 mm (1½ ") (alternative: stepped hose adapter 25 to 38 mm (1 to 1½ "))
AquaMax Eco Premium 8000/10000/12000/16000/20000:
•
Second inlet (1): Stepped hose adapter 25 to 38 mm (1 to 1½ ")
•
Pump outlet (2): Hose connector 50 mm (2 ") (alternative: stepped hose adapter 25 to 38 mm (1 to 1½ "))
Push the hose clip and the union nut over the hose. Fit the hose on the stepped hose adapter or hose connector and
secure with the hose clip.
Fit the stepped hose adapter or hose connector on the second inlet (1) or pump outlet (2) and hand-tighten the union
nut.
Содержание AquaMax Eco Premium 4000
