10
bit
0
1
0
1
0
1
1
1-digit decimal 0.0
0
1
0
1
1
0
0
2-digit decimal 0.00
0
1
0
1
1
0
1
3-digit decimal 0.000
0
1
0
1
1
1
0
4-digit decimal 0.0000
State B: comprehensive control character
D7
Verification bit
D6
0
D5
1
D4
1
D3
Dynamic mark bit D3=0, stability; D3=1, non-stability (dynamic)
D2
Overload mark bit D2=0, normality; D2=1, overload
D1
Positive and negative mark bit D1=0, positive number; D1=1, negative number
D0
Gross weight and net weight mark bit D0=0, gross weight; D0=1, net weight
State C: output empty case character
6.7.3 Every frame consists of 10 digits. The first is start bit, “0”. The ninth is stop bit, “1”. One of the other
eight is correction bit and the other seven are all data bits (from low to high), the pattern is as
follows:
Figure 6: Frame pattern
6.8
Bill-printing output
6.8.1Indicator data selecting
This indicator can be connected with TPμP-16S mini-printer. For communication with the printer,
you should turn the indicator setup data into F6=1 and make sure that the F7 value is equal to the
Baud rate of the printer. At this time, press [PRINT] on the indicator, the printer prints the following
bill mode (optional).
