Oak Telecom VoxBox, Руководство пользователя

Страница: 51 / 165

DTMF Programming
4.4.6.12 Leaving a Message in a Mailbox
Initiates the procedure for leaving a message in a mailbox.
Command: *150 + XX + B + #
Example: *150 00 8 #
The unit asks for a mailbox number when “8” is dialed during playback of script
message 00. After dialing the requested mailbox number, the caller hears the
mailbox’s greeting and can leave a message.
4.4.6.13 Retrieving Messages from a Mailbox
Initiates the procedure for retrieving messages from a mailbox.
Command: *160 + XX + B + #
Example: *160 00 9 #
The unit asks for a mailbox number and password when “9” is dialed during
playback of script message 00. After dialing the requested mailbox number and
password, the mailbox owner can retrieve his messages and access the user menu
to record a personal greeting, change his password, etc.
4.4.6.14 Directing a Call to an Extension
Enables the caller to dial an extension directly by programming the first digit of
the extension. When a caller dials the first digit of an extension during playback
of a script message, the unit stops the message and waits for the rest of the digits
of the extension. The number of digits in an extension is defined by code *300.
You can enter up to four different digits.
Command: *170 + XX + first digit(s) + #
Example 1: *170 00 2 #
The unit waits for the rest of the extension number when “2” is dialed during
playback of script message 00. After the caller dials the rest of the extension
number, the unit transfers the call to the extension.
Example 2: *170 00 2 4 #
Same as Example 1, except the extension number starts with 2 or 4 (for extension
numbers 2xx and 4xx).
Voice Mail and Auto Attendant System Installation and Programming Manual 4-21