Hardware Included:
• A - Qty: 16 3/8”-16 bolts + nuts
• B - Qty: 4 Base le lock nuts (black)
• C - Qty: 4 5/8” wood screws
A
A
A
A
B
C
Tools Needed (not included):
• Wrenches and/or socket set
• Phillips screwdriver
Parts Included:
• D - Qty: 1 Top frame
• E - Qty: 2 Legs
D
E
Step 1:
On a clean, flat surface
(such as a table topped with
cardboard, place the top frame
(D) on it’s side.
NOTE: There are bright green
stickers placed on the side of
the top frame that you need to
attach the legs to. The other
side will not allow a flush fit
and cause assembly issues.
Step 2:
Place one of the legs
on it’s side and with the leg
supports facing toward the top
frame.
Step 3:
The top frame has mounting plates on
both ends with matching hole patterns to the
frame legs. Attach the leg to the top frame using
8 of the 3/8”-16 bolts & nuts (A).
4 on each end.
Bolts go through the top frame then the legs -
pointing towards the bottom.
Step 4:
Using a socket set and wrench, tighten all 8
bolts.
4 on each end.
Repeat Steps 2-4 on the opposite end of the frame.
ASSEMBLY INSTRUCTIONS
JUBILEE TABLE FRAME
