O.S. engine GF40U-FI, Инструкция по эксплуатации

Страница: 14 / 36

13
・
Connect the tube from the Fuel pressure sensor unit to the Injector joint nipple. Use a Hose clamp. It is
a must.
・
Cut off an end of the tube when it is difficult to pull out from a nipple. Do not pull and twist the tube
strongly to pull it out. Do not give damage to a nipple when you use a nipper or a knife to cut the end of
the tube.
Installation
Be sure to use [Code No. 28382303 FLUORINE
(ETFE) RESIN TUBING (2m)] .
・
Once a tube is connected to a nipple, an end of the tube is expanded and deformed. Cut the end when
you use the same tube again.
From fuel pressure sensor unit
Hose clamp
Injector coupler
CUT
CUT