USER MANUAL
Digital Weatherstation | 719028
OVERVIEW
LCD MONITOR
12
5
6
3
9
4
10
11
7
8
1
2
1. LCD monitor
2.
[ SNOOZE / LIGHT ]
key
- When alarm is sounding, press to stop the current alarm and enter snooze.
- When alarm is sounding, press and hold for 2 seconds to stop the current alarm, the
clock will sound again in the next day.
3.
[ HISTORY ]
key
- In normal mode, press to display the past 24 hour pressure records.
4.
[ MEM ]
key
- In normal mode, press to check maximum and minimum thermo-hygro reading, or
press and hold for 3 seconds to delete both records.
5.
[ 12/24 / ]
key
- In normal mode, press to switch between 12 or 24 hour format of time display, or
press and hold for 3 seconds to activate wireless sensor pairing mode.
- In setting mode, press to decrease the setting values.
6.
[ CH / ]
key
- In normal mode, press to switch between CH 1~3 of outdoor sensor’s weather
display, or press and hold for 2 seconds to enter auto-cycle mode.
- In setting mode, press to increase the setting values.
7.
[ TIME ]
key
- In normal mode, press to switch between alarm 1 and alarm 2, or press and hold for
2 seconds to enter time setting mode.
- In time setting mode, press to step the setting.
8.
[ ALARM ]
key
-
seconds to enter alarm setting mode.
- In alarm setting mode, press to step the setting.
9.
[ °C / °F ]
key
- In normal mode, press to switch between Celsius and Fahrenheit.
10.
[ BARO ]
key
- In normal mode, press to switch between hPa (mb) and inHg, or press and hold for 3
seconds to enter the “rel” and “abs” switch mode.
11.
[ RESET ]
key
- In case of malfunction, press to reset the main unit.
12. Battery compartment
LCD MONITOR
1. Ch. 1-3 temperature &
humidity reading
2. Indoor temperature &
humidity reading
3. Weather forecast, Baro
pressure & moon phase
section
4.
Time and calendar section
1
2
3
4
WIRELESS SENSOR
1. LED indicator
- Flashes when the remote unit is
transmitting.
2. LCD display
- to show the detected temperature or
humidity of the sensor.
3. Wall mounting holder
4.
[ RESET ]
key
- Press to restart the sensor.
5.
[ CHANNEL ]
slide switch
- Assign the transmitter to Channel
from 1 to 3.
6. Battery compartment
- Accommodates 2 x AA size batteries.
GETTING STARTED
WIRELESS SENSOR
1. Remove the battery door.
2. Insert 2 x AA size batteries into the battery compartment. Make sure you insert
them the right way according to the polarity information marked on the battery
compartment.
3. Replace the battery door.
NOTE:
- Once the channel is assigned to a sensor, you can only change it by removing the
batteries or resetting the sensor, you also need to press and hold
[ 12/24 / ]
key for
3 seconds on main unit to pair this sensor.
- After replacing the batteries of the wireless sensor or the unit fails to receive wireless
[ 12/24 / ]
key for 3
seconds on main unit to pair this sensor again.
- Avoid placing the transmitter in direct sunlight, rain or snow.
-
- Place the units away from metal objects and electrical appliances to minimize the
range: 30m in usual circumstances.
LCD MONITOR
1. Remove the battery door and insert 2 x AA batteries into the battery compartment,
according to the polarity mark on the battery compartment.
2. After the batteries are installed, all LCD segment will be shown.
3. Press the
[ RESET ]
4. Replace the battery door.
NOTE:
If no display appears on the LCD after installing the batteries, press the
[ RESET ]
key by
using a metal wire.
VIEW MULTIPLE WIRELESS SENOR CHANNELS
1. In normal mode, press
[ CH / ]
key to switch the display between
CH 1~3
.
2. In normal mode, press and hold
[ CH / ]
key for 2 seconds to enter auto-cycle
mode, After a “bi” sounds, it will alternately displays the
CH 1~3
at 4 second intervals.
3. During auto-cycle mode, press
[ CH / ]
key again to stop auto-cycle mode and
display the current channel.
TIME AND CALENDAR SETTING
1. In normal mode, press and hold
[ TIME ]
key for 2 seconds to enter date and time
setting mode.
2. Press
[ CH / ]
or
[
12/24 /
]
key to adjust the setting.
3. Press
[ TIME ]
key to enter the next setting.
4. The setting sequence: year
DM / MD
month
day
hour
minute
second
weekday language.
5. Press
[ TIME ]
key or leave the unit for 30 seconds to complete the setting and return
to normal mode.
6. Weekday language GB
FR
DE
ES
IT
ALARM TIME SETTING AND DISPLAY
1. In normal time mode, press
[ TIME ]
key to select the alarm 1 or alarm 2.
2. In alarm1/alarm2 mode, press and hold
[ ALARM ]
key for 2 seconds until alarm hour
3. Press
[ CH / ]
or
[ 12/24 / ]
key to change the value
4. Repeat the above operations to set the alarm time in this order: Hour
Minute
5. Press
[ ALARM ]
key or leave the unit for 30 seconds to return to normal mode.
Time of alarm 2
Ice alert icon
USING ALARM AND SNOOZE FUNCTION
1. Set the desired alarm time as described in the previous section.
2. Or press
[ ALARM ]
key to turn on alarm 1, press it again to turn on alarm 2, press
it thrice to turn on both alarm 1 and alarm 2, with the alarm icons “ ” and / or “
icons disappear.
3. When clock reach the alarm time, alarm sound will start.
Where it can be stopped by following operation:
a) Auto-stop after 2 minutes alarming if without any operation and the alarm will activate
again in the next day.
b) By pressing
[ SNOOZE / LIGHT ]
key to enter snooze that the alarm will sound again
after 5 minutes.
c) By pressing and hold
[ SNOOZE / LIGHT ]
key for 2 seconds to stop the alarm and
will activate again in the next day
d) By pressing
[ ALARM ]
key to stop the alarm and the alarm will activate again in the
next day.
NOTE:
- The alarm function will turn on automatically once you set the alarm time.
- The snooze could be used continuously in 24 hours.
- During the snooze, the alarm icons “ ” and / or “