NXP Semiconductors
UM11490
Feature Configuration Guide for NXP-based Wireless Modules on i.MX 8M Quad EVK
3 Wi-Fi driver debugging
This section explains how to enable driver debug logs and access debug information.
Some debug logs can be enabled at runtime and driver load time. Other logs require
to first rebuild the driver with a specific configuration. The firmware dump methods to
generates dump file to debug on the firmware front are also detailed in this section.
3.1 Enable the driver debug logs
This section provides the guidelines on how to enable the driver debug logs using either
the module parameter or
/proc
at runtime.
3.1.1 Use the module parameter
Use the
drvdbg
module parameter to enable driver debug logs while the driver is
Section 3.2 "Driver debug log types"
for the module parameter values.
Edit the configuration file:
root@imx8mqevk:~# nano /lib/firmware/nxp/wifi_mod_para_sd8987.conf
Configuration file content:
SD8987 = {
cfg80211_wext=0xf
wfd_name=p2p
cal_data_cfg=none
fw_name=nxp/sdiouart8987_combo_v0.bin
drvdbg=< bit masks of driver debug message control>
}
3.1.2 Use /proc at runtime
Use the following command to enable driver debug logs when the driver is already
loaded:
root@imx8mqevk:~# echo "drvdbg=<
bit masks of driver debug
message control
>" > /proc/mwlan/adapter0/<interface>/debug
UM11490
All information provided in this document is subject to legal disclaimers.
© NXP B.V. 2021. All rights reserved.
User manual
Rev. 2 — 29 January 2021
44 / 88
