NXP Semiconductors TWR-K70F120M, Руководство пользователя

Страница: 8 / 25

TWR-K70F120M Tower Module User's Manual Page 8 of 25
1.3 Getting Started
Follow the Quick Start Guide found printed in the TWR-K70F120M box or the interactive DVD for the
list of recommended steps for getting started. There are also lab walk-through guides available on the
tool support page for the TWR-K70F120M:
http://www.freescale.com/TWR-K70F120M .
1.4 Reference Documents
The documents listed below should be referenced for more information on the Kinetis family, Tower
System, and MCU Modules. These can be found in the documentation section of
freescale.com/TWR-
K70F120M or freescale.com/kinetis .

TWR-K70F120M-QSG: Quick Start Guide

TWR-K70F120M-SCH: Schematics

TWR-K70F120M-PWB: Design Package

K70 Family Product Brief

K70 Family Reference Manual

Tower Configuration Tool
2 Hardware Description
The TWR-K70F120M is a Tower Controller Module featuring the MK70FN1M0VMJ12—an ARM Cortex-
M4 based microcontroller with graphical LCD controller, tamper detection, USB 2.0 HS Controller, USB
2.0 full-speed OTG controller and 10/100 Mbps Ethernet MAC in a 256 MAPBGA package with a
maximum core operating frequency of 120MHz. It is intended for use in the Freescale Tower System
but can operate stand-alone. An on-board debug circuit, OSJTAG, provides a JTAG debug interface and
a power supply input through a single USB mini-AB connector. Figure 4 shows a block diagram of the
TWR-K70F120M. The following sections describe the hardware in more detail.